Title |
Author(s) |
IrusType |
Repository |
Item URL |
Total Downloads |
A fluid-structure-thermal model for bump-type foil thrust bearings |
Qin, Kan; Jacobs, Peter A.; Keep, Joshua A.; Li, Daijin; Jahn, Ingo H. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:727113 |
71 |
An investigation of evaporation from single saline water droplets: experimental and theoretical approaches |
Sadafi, M. H.; Jahn, I.; Stilgoe, A. B.; Hooman, K. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:350313 |
1 |
Code for the design and evaluation of heat exchangers for complex fluids |
Jahn, Ingo H. J. |
Report |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:524902 |
4650 |
Cooling issues for small-scale sCO2 powerplants |
Ingo Jahn; Duniam, Sam; Veeraragavan, Ananthanarayanan |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:382248 |
3 |
Design approach for maximising contacting filament seal performance retention |
Jahn, Ingo H. J. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:335015 |
2 |
Design method and performance comparison of plenum and volute delivery systems for radial inflow turbines |
Keep, J. A.; Jahn, I. J. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:411596 |
201 |
Development of a space marching throughflow code for radial inflow turbines |
Keep, Joshua A.; Jahn, Ingo H. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:411597 |
26 |
e3prepToFoam: a mesh generator for OpenFOAM |
Jahn, Ingo H. J.; Qin, Kan |
Report |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:357148 |
707 |
Effect of Vortex-injection Interaction on Wall Heat Transfer in a Flat Plate and Fin Corner Geometry |
Llobet, Juan R.; Gollan, Rowan J.; Jahn, Ingo H. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:425734 |
43 |
Effect of vortex-injection interaction on wall heat transfer in a flat plate with fin corner geometry |
Llobet, Juan R.; Gollan, Rowan J.; Jahn, Ingo H. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:686404 |
1 |
Experimental investigation of a leaf seal prototype at engine-representative speeds and pressures |
Pekris, Michael J.; Franceschini, Gervas; Jahn, Ingo H. J.; Gillespie, David R. H. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:371006 |
5 |
High speed characterization of a prototype leaf seal on an advanced seal test facility |
Pekris, Michael J.; Nasti, Adele; Jahn, Ingo H. J.; Franceschini, Gervas |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:371007 |
2 |
Hydrodynamic air-riding in leaf seals |
Jahn, Ingo H. J.; Gillespie, David; Cooper, Paul |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:318289 |
1 |
Improved understanding of negative stiffness in filament seals |
Franceschini, Gervas; Jahn, Ingo H. J.; Owen, Andrew K.; Jones, Terry V.; Gillespie, David R. H . |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:272929 |
1 |
Improved understanding of stiffness in leaf-type filament seals |
Jahn, Ingo H. J.; Franceschini, Gervas; Owen, Andrew K.; Jones, Terry V.; Gillespie, David R. H. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:371350 |
1 |
Influence of ambient conditions and water flow on the performance of pre-cooled natural draft dry cooling towers |
He, Suoying; Guan, Zhiqiang; Gurgenci, Hal; Jahn, Ingo; Lu, Yuanshen; Alkhedhair, Abdullah M. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:328730 |
906 |
Model predictive control of non-ideal-gas heat exchangers |
Bone, Viv; Reddell, Thomas; Kearney, Michael; Jahn, Ingo |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
|
32 |
Negative stiffness in gas turbine leaf seals |
Jahn, Ingo H. J.; Franceschini, Gervas; Owen, Andrew K.; Gillespie, David R. H. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:272928 |
3 |
Nozzle arrangement effect on cooling performance of saline water spray cooling |
Sadafi, M. H.; Jahn, Ingo; Hooman, Kamel |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:381030 |
302 |
Numerical simulation of water spray in natural draft dry cooling towers with a new nozzle representation approach |
Alkhedhair, Abdullah; Jahn, Ingo; Gurgenci, Hal; Guan, Zhiqiang; He, Suoying; Lu, Yuanshen |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:377711 |
571 |
On the Influence of low-power laser source on the evaporation of single droplets: experimental and numerical approaches |
Sadafi, M. H.; González Ruiz, S.; Vetrano, M. R.; van Beeck, J.; Jahn, I.; Buchlin, J. M.; Hooman, K. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:390548 |
64 |
pfow.py a potential flow solver and visualizer |
Jahn, Ingo H. J. |
Report |
University of Queensland [UQ eSpace] |
|
611 |
Prediction of dynamic characteristics of foil thrust bearings using computational fluid dynamics |
Qin, K.; Jahn, I. H.; Jacobs, P. A. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:417286 |
2 |
Radial inflow turbine meshing rev. 1 |
Jahn, Ingo H. J. |
Report |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:362796 |
164 |
SSCAR - Steady State Cycle AnalyseR |
Jahn, Ingo |
Report |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:604824 |
201 |
Structural Deformation of a Circular Thin Plate with Combinations of Fixed and Free Edges |
Qin, Kan; Jahn, Ingo |
Report |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:363873 |
498 |
Supercritical CO2 (sCO2) radial inflow turbine design performance as a function of turbine size parameters - GT2016-58137 |
Jianhui Qi; Thomas Reddell; Kan Qin; Hooman, Kamel; Ingo Jahn |
Dataset |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:380763 |
58 |
Taylor-Couette-Poiseuille flow heat transfer in a high Taylor number test rig |
Swann, Phillip B.; Jahn, Ingo H.; Russell, Hugh |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
|
57 |
The effect of convection area on the deformation of dry gas seal operating with supercritical CO2 |
Fairuz, Z. M.; Jahn, Ingo; Abdul-Rahman, Razi |
Article |
University of Queensland [UQ eSpace] |
|
4 |
The Eilmer3 code: user guide and example book 2015 edition |
Jacobs, Peter A.; Gollan, Rowan J.; Jahn, Ingo; Potter, Daniel F. |
Report |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:366649 |
320 |
The influence of real gas effects on the performance of supercritical CO2 dry gas seals |
Fairuz, Z. M.; Jahn, I. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:408553 |
165 |
Two way coupled hypersonic fluid structure interaction simulations with Eilmer |
Jahn, I. H. J.; Currao, G. M. D.; Neely, A. J.; Gollan, R.; Jacobs, P. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
|
169 |