Title |
Author(s) |
IrusType |
Repository |
Item URL |
Total Downloads |
A biocompatible thermoset polymer binder for Direct Ink Writing of porous titanium scaffolds for bone tissue engineering |
Chen, Yunhui; Han, Pingping; Vandi, Luigi-Jules; Dehghan-Manshadi, Ali; Humphry, Jarrad; Kent, Damon; Stefani, Ilaria; Lee, Peter; Heitzmann, Michael; Cooper-White, Justin; Dargusch, Matthew |
Article |
University of Queensland [UQ eSpace] |
|
77 |
A Model to Predict the Heat Transfer Coefficient at the Casting-Die Interface for the High Pressure Die Casting Process |
Hamasaiid, A.; Dargusch, M.S.; Davidson, C.; Loulou, T.; Dour, G. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:137778 |
99 |
A new approach to nuclei identification and grain refinement in titanium alloys |
Tedman-Jones, S. N.; McDonald, S. D.; Bermingham, M. J.; StJohn, D. H.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
|
7 |
A Novel Hydrogel Surface Grafted With Dual Functional Peptides for Sustaining Long-Term Self-Renewal of Human Induced Pluripotent Stem Cells and Manipulating Their Osteoblastic Maturation |
Deng, Yi; Wei, Shicheng; Yang, Lei; Yang, Weizhong; Dargusch, Matthew S.; Chen, Zhi-Gang |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:723459 |
19 |
A novel Ti-Fe composite coating deposited using laser cladding of low cost recycled nano-crystalline titanium powder |
Nazari, Keivan A.; Rahman Rashid, R.A.; Palanisamy, S.; Xia, K.; Dargusch, M.S. |
Article |
University of Queensland [UQ eSpace] |
|
28 |
A reliable and highly efficient exfoliation method for water-dispersible MoS2 nanosheet |
Yu, Hua; Zhu, Hanliang; Dargusch, Matthew; Huang, Yuelong |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:715520 |
95 |
Absorbable Mg surgical tack: proof of concept and in situ fixation strength |
Johnston, Sean; Lau, Cora; Dargusch, Matthew S.; Atrens, Andrej |
Article |
University of Queensland [UQ eSpace] |
|
4 |
Additively manufactured biomedical Ti-Nb-Ta-Zr lattices with tunable Young's modulus: Mechanical property, biocompatibility, and proteomics analysis |
Luo, J. P.; Huang, Y. J.; Xu, J. Y.; Sun, J. F.; Dargusch, M. S.; Hou, C. H.; Ren, L.; Wang, R. Z.; Ebel, T.; Yan, M. |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications |
Carluccio, Danilo; Xu, Chun; Venezuela, Jeffrey; Cao, Yuxue; Kent, Damon; Bermingham, Michael; Demir, Ali Gökhan; Previtali, Barbara; Ye, Qingsong; Dargusch, Matthew |
Article |
University of Queensland [UQ eSpace] |
|
15 |
Addressing the slow corrosion rate of biodegradable Fe-Mn: Current approaches and future trends |
Venezuela, J.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Akermanite reinforced PHBV scaffolds manufactured using selective laser sintering |
Diermann, Sven H.; Lu, Mingyuan; Dargusch, Matthew; Grøndahl, Lisbeth; Huang, Han |
Article |
University of Queensland [UQ eSpace] |
|
11 |
An in vitro evaluation of the hierarchical micro/nanoporous structure of a Ti3Zr2Sn3Mo25Nb alloy after surface dealloying |
Wang, Lan; Zhou, Wenhao; Yu, Zhentao; Yu, Sen; Zhou, Lian; Cao, Yemin; Dargusch, Matthew; Wang, Gui |
Article |
University of Queensland [UQ eSpace] |
|
1 |
An inverse model to determine the heat transfer coefficient and its evolution with time during solidification of light alloys |
Dargusch, M. S.; Hamasaiid, A.; Dour, G. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:173366 |
287 |
An investigation of the mechanical behaviour of fine tubes fabricated from a Ti-25Nb-3Mo-3Zr-2Sn alloy |
Zhang, Yaowu; Kent, Damon; Wang, Gui; St John, David; Dargusch, Matthew |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:369224 |
70 |
Anti-thrombogenic surface coatings for extracorporeal membrane oxygenation: a narrative review |
Zhang, Meili; Pauls, Jo P.; Bartnikowski, Nicole; Haymet, Andrew B.; Chan, Chris H. H.; Suen, Jacky Y.; Schneider, Bailey; Ki, Katrina K.; Whittaker, Andrew K.; Dargusch, Matthew S.; Fraser, John F. |
Article |
University of Queensland [UQ eSpace] |
|
2 |
Atomic size and local order effects on the high temperature strength of binary Mg alloys |
Abaspour, Saeideh; Zambelli, Victor; Dargusch, Matthew; Caceres, Carlos H. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:408661 |
53 |
Binary Zn–Ti alloys for orthopedic applications: corrosion and degradation behaviors, friction and wear performance, and cytotoxicity |
Wang, Kun; Tong, Xian; Lin, Jixing; Wei, Aiping; Li, Yuncang; Dargusch, Matthew; Wen, Cuie |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Biocompatible porous titanium scaffolds produced using a novel space holder technique |
Chen, Yunhui; Frith, Jessica Ellen; Dehghan-Manshadi, Ali; Kent, Damon; Bermingham, Michael; Dargusch, Matthew |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:720449 |
7 |
Biodegradable shape memory alloys: progress and prospects |
Wang, Yuan; Venezuela, Jeffrey; Dargusch, Matthew |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Biodegradable ternary Zn–3Ge–0.5X (X=Cu, Mg, and Fe) alloys for orthopedic applications |
Lin, Jixing; Tong, Xian; Sun, Quanxiang; Luan, Yanan; Zhang, Dechuang; Shi, Zimu; Wang, Kun; Lin, Jianguo; Li, Yuncang; Dargusch, Matthew; Wen, Cuie |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Biodegradable Zn–3Cu and Zn–3Cu–0.2Ti alloys with ultrahigh ductility and antibacterial ability for orthopedic applications |
Lin, Jixing; Tong, Xian; Wang, Kun; Shi, Zimu; Li, Yuncang; Dargusch, Matthew; Wen, Cuie |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:0034716 |
1 |
Challenges and opportunities in the selective laser melting of biodegradable metals for load-bearing bone scaffold applications |
Carluccio, D.; Demir, A. G.; Bermingham, M. J.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
|
13 |
Comparative study of pure iron manufactured by selective laser melting, laser metal deposition, and casting processes |
Carluccio, Danilo; Bermingham, Michael; Kent, Damon; Demir, Ali Gökhan; Previtali, Barbara; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
55 |
Computation-guided design of high-performance flexible thermoelectric modules for sunlight-to-electricity conversion |
Xu, Shengduo; Hong, Min; Shi, Xiao-Lei; Li, Meng; Sun, Qiang; Chen, Qixiang; Dargusch, Matthew; Zou, Jin; Chen, Zhi-Gang |
Article |
University of Queensland [UQ eSpace] |
|
37 |
Constitutive equation for the hot deformation behavior of Csf/AZ91D composites and its validity for numerical simulation |
Wang, Zhenjun; Qi, Lehua; Wang, Gui; Li, Hejun; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:408525 |
78 |
Constitutive modelling of the flow behaviour of a β titanium alloy at high strain rates and elevated temperatures using the Johnson-Cook and modified Zerilli-Armstrong models |
Zhan, Hongyi; Wang, Gui; Kent, Damon; Dargusch, Matthew |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:335063 |
224 |
Corrosion and stress corrosion cracking of ultra-high-purity Mg5Zn |
Shi, Zhiming; Hofstetter, Joelle; Cao, Fuyong; Uggowitzer, Peter J.; Dargusch, Matthew S.; Atrens, Andrej |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:351004 |
94 |
Corrosion of Mg alloys EV31A, WE43B, and ZE41A in chloride‐ and sulfate‐containing solutions saturated with magnesium hydroxide |
Soltan, Akif; Dargusch, Matthew S.; Shi, Zhiming; Gerrard, Darren; Al Shabibi, Sulaiman; Kuo, Yu‐Chieh; Atrens, Andrej |
Article |
University of Queensland [UQ eSpace] |
|
25 |
Current understanding of the origin of equiaxed grains in pure metals during ultrasonic solidification and a comparison of grain formation processes with low frequency vibration, pulsed magnetic and electric-current pulse techniques |
Balasubramani, Nagasivamuni; Wang, Gui; StJohn, David H.; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Deformation behaviour and mechanisms during hot compression at supertransus temperatures in Ti-10V-2Fe-3Al |
Zhao, Juan; Zhong, Jie; Yan, Fei; Chai, Fang; Dargusch, Matthew |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:546948 |
172 |
Development of biodegradable Zn–1Mg–0.1RE (RE = Er, Dy, and Ho) alloys for biomedical applications |
Tong, Xian; Zhang, Dechuang; Lin, Jixing; Dai, Yilong; Luan, Yanan; Sun, Quanxiang; Shi, Zimu; Wang, Kun; Gao, Yao; Lin, Jianguo; Li, Yuncang; Dargusch, Matthew; Wen, Cuie |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Dynamic recrystallization of pure zinc during high strain-rate compression at ambient temperature |
Liu, Shiyang; Kent, Damon; Zhan, Hongyi; Doan, Nghiem; Dargusch, Matthew; Wang, Gui |
Article |
University of Queensland [UQ eSpace] |
|
2 |
Effect of Fe addition on properties of Ti–6Al-xFe manufactured by blended elemental process |
Sjafrizal, Teddy; Dehghan-Manshadi, Ali; Kent, Damon; Yan, Ming; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Effect of laser reheat post-treatment on the microstructural characteristics of laser-cladded ultra-high strength steel |
Rahman Rashid, R. A.; Nazari, K. A.; Barr, C.; Palanisamy, S.; Orchowski, N.; Matthews, N.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
|
13 |
Effect of pulsed current on the microstructure and distribution of C and Mn in an Fe-0.5C-1.5Mn alloy |
Wang, Hai Chuan; Hong, Peng; Liao, Zhiyou; Li, Xin; Li, Jie; Wang, Gui; Wang, Shijun; Dargusch, Matthew S. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:256341 |
1 |
Effect of pulsed electric field on the distribution and migration of P, S, and Si elements of Fe-based alloys |
Liao, Zhiyou; Wang, Haichuan; Hong, Ping; Li, Xin; Li, Ji; Wang, Shijun; Wang, Gui; Dargusch, Matthew S. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:256318 |
1 |
Effect of static magnetic field on distribution of elements in the Fe-S, Fe-Si, and Fe-Mn alloys |
Wang, Haichuan; Liao, Zhiyou; Pang, Ruipeng; Hong, Peng; Wang, Shijun; Li, Jie; Wang, Gui; Dargusch, Matthew S. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:256313 |
1 |
Effect of tool wear evolution on chip formation during dry machining of Ti-6Al-4V alloy |
Dargusch, Matthew S.; Sun, Shoujin; Kim, Ji Won; Li, Tong; Trimby, Patrick; Cairney, Julie |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:709725 |
45 |
Effect of trace lanthanum hexaboride and boron additions on microstructure, tensile properties and anisotropy of Ti-6Al-4V produced by additive manufacturing |
Bermingham, M. J.; McDonald, S. D.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
|
15 |
Effect of ultrasonic treatment on the alloying and grain refinement efficiency of a Mg – Zr master alloy added to magnesium at hypo- and hyper-peritectic compositions |
Nagasivamuni, B.; Wang, Gui; St John, David H.; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
17 |
Effect of Ultrasonic Treatment on The As-Cast Grain Structure during The Solidification of An Al-2Cu Alloy |
Wang, Gui; Dargusch, Matthew S.; St John, David H. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:418261 |
4 |
Effects of chip conditions on the solid state recycling of Ti-6Al-4V machining chips |
Lui, E. W.; Palanisamy, S.; Dargusch, M. S.; Xia, K. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:408229 |
101 |
Eliminating segregation defects during additive manufacturing of high strength β-titanium alloys |
Ng, C. H.; Bermingham, M. J.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Enhancing antibacterial performance and biocompatibility of pure titanium by a two-step electrochemical surface coating |
Yu, Sen; Guo, Dagang; Han, Jianye; Sun, Lijuan; Zhu, Hui; Yu, Zhentao; Dargusch, Matthew; Wang, Gui |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Evaluation of the mechanical and wear properties of titanium produced by three different additive manufacturing methods for biomedical application |
Attar, H.; Bermingham, M. J.; Ehtemam-Haghighi, S.; Dehghan-Manshadi, A.; Kent, D.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
|
30 |
Evaluation of the mechanical compatibility of additively manufactured porous Ti–25Ta alloy for load-bearing implant applications |
Soro, Nicolas; Attar, Hooyar; Brodie, Erin; Veidt, Martin; Molotnikov, Andrey; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Evolution of the as-cast grain microstructure of an ultrasonically treated Al–2Cu alloy |
Wang, Gui; Croaker, Paul; Dargusch, Matthew; McGuckin, Damian; StJohn, David |
Article |
University of Queensland [UQ eSpace] |
|
40 |
Exploring the underlying mechanisms behind the increased far infrared radiation properties of perovskite-type Ce/Mn co-doped ceramics |
Deng, Yi; Zhang, Kewei; Shi, Xiuyuan; Dong, Taosheng; Yang, Lei; Yang, Weizhong; Hong, Min; Wang, Yuan; Dargusch, Matthew; Chen, Zhi-Gang |
Article |
University of Queensland [UQ eSpace] |
|
30 |
FEA modelling of cutting force and chip formation in thermally assisted machining of Ti6Al4V alloy |
Xi, Yao; Bermingham, Michael; Wang, Gui; Dargusch, Matthew |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:313169 |
1 |
Finite element analysis of porous commercially pure titanium for biomedical implant application |
Soro, Nicolas; Brassart, Laurence; Chen, Yunhui; Veidt, Martin; Attar, Hooyar; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:727560 |
87 |
Flexible Thermoelectric Materials and Generators: Challenges and Innovations |
Wang, Yuan; Yang, Lei; Shi, Xiao‐Lei; Shi, Xun; Chen, Lidong; Dargusch, Matthew S.; Zou, Jin; Chen, Zhi‐Gang |
Article |
University of Queensland [UQ eSpace] |
|
90 |
Functionally graded porous scaffolds made of Ti-based agglomerates |
Nazari, Keivan A.; Hilditch, Tim; Dargusch, Matthew S.; Nouri, Alireza |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:408226 |
81 |
Grain refinement in laser remelted Mg-3Nd-1Gd-0.5Zr alloy |
Zhang, Duyao; Qiu, Dong; Zhu, Suming; Dargusch, Matthew; StJohn, David; Easton, Mark |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Grain refinement of Al-Si hypoeutectic alloys by Al3Ti1B master alloy and ultrasonic treatment |
Wang, Gui; Wang, Eric Qiang; Prasad, Arvind; Dargusch, Matthew; StJohn, David H. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:404990 |
171 |
Grain refinement of laser remelted Al-7Si and 6061 aluminium alloys with Tibor® and scandium additions |
Carluccio, D.; Bermingham, M. J.; Zhang, Y.; StJohn, D. H.; Yang, K.; Rometsch, P. A.; Wu, X.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
|
7 |
Grain refinement of wire arc additively manufactured titanium by the addition of silicon |
Mereddy, S.; Bermingham, M. J.; StJohn, D. H.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:416955 |
317 |
Granular nanostructure: a facile biomimetic strategy for the design of supertough polymeric materials with high ductility and strength |
Song, Pingan; Xu, Zhiguang; Dargusch, Matthew S; Chen, Zhi-Gang; Wang, Hao; Guo, Qipeng |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:696798 |
1 |
Heterogeneous nucleation of pure Al on MgO single crystal substrate accompanied by a MgAl2O4 buffer layer |
Sun, Jie; Wang, Dingpu; Zhang, Yunhu; Sheng, Cheng; Dargusch, Matthew; Wang, Gui; St John, David; Zhai, Qijie |
Article |
University of Queensland [UQ eSpace] |
|
114 |
High performance thermoelectric materials: Progress and their applications |
Yang, Lei; Chen, Zhi-Gang; Dargusch, Matthew S.; Zou, Jin |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:722903 |
84 |
Identifying the stages during ultrasonic processing that reduce the grain size of aluminum with added Al3Ti1B master alloy |
Wang, Gui; Dargusch, Matthew S.; Eskin, Dmitry G.; StJohn, David H. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:685198 |
64 |
Improved biodegradable magnesium alloys through advanced solidification processing |
Dargusch, M.S.; Balasubramani, N.; Venezuela, J.; Johnston, S.; Wang, G.; Lau, C.; Bermingham, M.; Kent, D.; StJohn, D.H. |
Article |
University of Queensland [UQ eSpace] |
|
1 |
In Situ Synchrotron Radiation Study of TiH2-6Al-4V and Ti-6Al-4V: Accelerated Alloying and Phase Transformation, and Formation of an Oxygen-Enriched Ti4Fe2O Phase in TiH2-6Al-4V |
Yan, Ming; Dargusch, M. S.; Kong, C.; Kimpton, J. A.; Kohara, S.; Brandt, M.; Qian, M. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:344785 |
66 |
In vitro degradation of a unique porous PHBV scaffold manufactured using selective laser sintering |
Diermann, Sven H.; Lu, Mingyuan; Edwards, Grant; Dargusch, Matthew; Huang, Han |
Article |
University of Queensland [UQ eSpace] |
|
6 |
Industry 4.0: Development of a multi-agent system for dynamic value stream mapping in SMEs |
Huang, Zhuoyu; Kim, Jiwon; Sadri, Alireza; Dowey, Steve; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
236 |
Influence of commercial corrosion‐inhibiting compounds on the atmospheric corrosion of the magnesium alloys EV31A, WE43B, ZE41A and pure magnesium |
Soltan, Akif; Dargusch, Matthew S.; Shi, Zhiming; Gerrard, Darren; Atrens, Andrej |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Influence of heat treatment on the pseudoelastic behaviour of a beta Ti-25Nb-3Zr-3Mo-2Sn alloy |
Kent, Damon; Wang,Gui; Zheng, Li Hui; Yu, Zhen Tao; Dargusch, Matthew S. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:227048 |
1 |
Influence of hot rolling on the corrosion behavior of several Mg-X alloys |
Cao, Fuyong; Shi, Zhiming; Song, Guang-Ling; Liu, Ming; Dargusch, Matthew S.; Atrens, Andrej |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:345271 |
25 |
Influence of strain rate and crystallographic orientation on dynamic recrystallization of pure Zn during room-temperature compression |
Liu, Shiyang; Kent, Damon; Zhan, Hongyi; Doan, Nghiem; Wang, Chang; Yu, Sen; Dargusch, Matthew; Wang, Gui |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Investigating Mg Biocorrosion In Vitro: Lessons Learned and Recommendations |
Johnston, Sean; Shi, Zhiming; Venezuela, Jeffrey; Wen, Cuie; Dargusch, Matthew S.; Atrens, Andrej |
Article |
University of Queensland [UQ eSpace] |
|
5 |
Investigating the grain refinement mechanisms of pulsed electric current, ultrasonic and melt stirring solidification of pure aluminium |
Balasubramani, Nagasivamuni; Xu, Yanyi; Zhang, Yunhu; Zhai, Qijie; Wang, Gui; StJohn, David; Dargusch, Matthew |
Article |
University of Queensland [UQ eSpace] |
|
2 |
Investigating the morphological effects of solute on the β-phase in as-cast titanium alloys |
Tedman-Jones, S.N.; McDonald, S.D.; Bermingham, M.J.; St John, D.H.; Dargusch, M.S. |
Article |
University of Queensland [UQ eSpace] |
|
5 |
Investigation of the structure and mechanical properties of additively manufactured Ti-6Al-4V biomedical scaffolds designed with a Schwartz primitive unit-cell |
Soro, Nicolas; Attar, Hooyar; Wu, Xinhua; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
8 |
Local structure of NiAl compounds investigated by extended X-ray absorption fine-structure spectroscopy |
Tian, J. S.; Han, G. M.; Wei, H.; Jin, T.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:285315 |
58 |
Manufacturing of biocompatible porous titanium scaffolds using a novel spherical sugar pellet space holder |
Chen, Yunhui; Kent, Damon; Bermingham, Michael; Dehghan-Manshadi, Ali; Dargusch, Matthew |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:510575 |
112 |
Mechanisms of the origin of fine and non-dendritic grains at the sonotrode–liquid metal interface during ultrasonic solidification of metals |
Balasubramani, Nagasivamuni; Wang, Gui; StJohn, David H.; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
2 |
Metal alloys for fusion-based additive manufacturing |
Zhang, Duyao; Sun, Shoujin; Qiu, Dong; Gibson, Mark A.; Dargusch, Matthew S.; Brandt, Milan; Qian, Ma; Easton, Mark |
Article |
University of Queensland [UQ eSpace] |
|
111 |
Metal injection moulding of surgical tools, biomaterials and medical devices: a review |
Dehghan-Manshadi, Ali; Yu, Peng; Dargusch, Matthew; StJohn, David; Qian, Ma |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Metal injection moulding of titanium and titanium alloys: challenges and recent development |
Dehghan-Manshadi, A.; Bermingham, M. J.; Dargusch, M. S.; StJohn, D. H.; Qian, M. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:676413 |
1023 |
Metallurgical features of direct laser-deposited Ti6Al4V with trace boron |
Rahman Rashid, R. A.; Palanisamy, S.; Attar, H.; Bermingham, M.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Microstructural evolution and mechanical properties of bulk and porous low-cost Ti–Mo–Fe alloys produced by powder metallurgy |
Ehtemam-Haghighi, Shima; Attar, Hooyar; Okulov, Ilya V.; Dargusch, Matthew S.; Kent, Damon |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Microstructure and mechanical properties of cast Ti25Nb3Mo3Zr2Sn alloy |
Wang, Gui; Kent, Damon; Paladugu, Mohanchand; Yu, Zhen Tao; Dargusch, Matthew S. |
Book Section |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:211418 |
1 |
Microstructure and texture inhomogeneity in Ti-10V-2Fe-3Al |
Zhao, Juan; Dargusch, Matthew; Davies, Chris H. J. |
Book Section |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:278903 |
21 |
Microstructure characterization of laser welded near-beta titanium alloy 'TLM' under different process conditions |
Buddery, A; Wang, G; Yu, ZT; Dargusch, M; Nabulsi, S |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:229920 |
2 |
Microstructure, phase composition and mechanical properties of new, low cost Ti-Mn-Nb alloys for biomedical applications |
Ehtemam-Haghighi, Shima; Attar, Hooyar; Dargusch, Matthew S.; Kent, Damon |
Article |
University of Queensland [UQ eSpace] |
|
6 |
Modeling of the dynamic recrystallization behavior of Csf/AZ91D magnesium matrix composites during hot compression process |
Wang, Zhenjun; Huang, Biao; Qi, Lehua; Wang, Gui; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:609249 |
135 |
Modelling the high temperature deformation of Ti-6Al-4V |
Zhong, J.; Dargusch, M.; Davies, C. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:238587 |
4 |
N-type Bi-doped PbTe nanocubes with enhanced thermoelectric performance |
Yang, Lei; Chen, Zhi-Gang; Hong, Min; Wang, Lihua; Kong, Deli; Huang, Liqing; Han, Guang; Zou, Yichao; Dargusch, Matthew; Zou, Jin |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:413855 |
205 |
Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting |
Attar, H.; Ehtemam-Haghighi, S.; Kent, D.; Okulov, I. V.; Wendrock, H.; Bӧnisch, M.; Volegov, A. S.; Calin, M.; Eckert, J.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:482611 |
622 |
Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments |
Bermingham, M. J.; Nicastro, L.; Kent, D.; Chen, Y.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
|
89 |
Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing |
Bermingham, M. J.; StJohn, D. H.; Krynen, J.; Tedman-Jones, S.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
|
38 |
Properties of powder metallurgy-fabricated oxygen-containing beta Ti-Nb-Mo-Sn-Fe alloys for biomedical applications |
Dehghan-Manshadi, Ali; Kent, Damon; StJohn, David; Dargusch, Matthew |
Article |
University of Queensland [UQ eSpace] |
|
44 |
Raw and processed data from study of effects of Sr alloying on microstructure of a Mg-Al-RE alloy and on the corrosion performance |
Shi, Zhiming; Dargusch, Matthew S.; Zhu, Hanling; Atrens, Andrej; Song, Guang-ling |
Dataset |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:732096 |
11 |
Real-time observation of the temperature-induced phase transformation in GeTe and its thermal expansion properties |
Tran, Xuan Quy; Hong, Min; Maeno, Hiroshi; Kawami, Youichirou; Toriyama, Takaaki; Jack, Kevin; Chen, Zhi-Gang; Zou, Jin; Matsumura, Syo; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
32 |
Realizing zT of 2.3 in Ge1-x-y Sbx Iny Te via Reducing the Phase-Transition Temperature and Introducing Resonant Energy Doping |
Hong, Min; Chen, Zhi-Gang; Yang, Lei; Zou, Yi-Chao; Dargusch, Matthew S; Wang, Hao; Zou, Jin |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:717052 |
8 |
Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: a review |
Attar, Hooyar; Ehtemam-Haghighi, Shima; Kent, Damon; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
41 |
Recycling of titanium machining chips by severe plastic deformation consolidation |
Luo, P.; Xie, H.; Paladugu, M.; Palanisamy, S.; Dargusch, M. S.; Xia, K. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:209574 |
2 |
Remelt processing and microstructure of selective laser melted Ti25Ta |
Brodie, E. G.; Medvedev, A. E.; Frith, J. E.; Dargusch, M. S.; Fraser, H. L.; Molotnikov, A. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:3957694 |
1 |
Response of aluminium honeycomb sandwich panels subjected to foam projectile impact - an experimental study |
Yahaya, M. A.; Ruan, D.; Lu, G.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:340129 |
513 |
Revealing the mechanisms of grain nucleation and formation during additive manufacturing |
Bermingham, Michael; StJohn, David; Easton, Mark; Yuan, Lang; Dargusch, Matthew |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
|
15 |
Review of the atmospheric corrosion of magnesium alloys |
Liu, Hongguang; Cao, Fuyong; Song, Guang-Ling; Zheng, Dajiang; Shi, Zhiming; Dargusch, Mathew S.; Atrens, Andrej |
Article |
University of Queensland [UQ eSpace] |
|
10 |
Role of germanium in microstructural development of powder metallurgy Ti-20Cr-xGe alloys |
Sjafrizal, Teddy; Kent, Damon; Dehghan-Manshadi, Ali; Yan, Ming; S. Dargusch, Matthew |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium |
Wang, G.; Wang, Q.; Easton, M. A.; Dargusch, M. S.; Qian, M.; Eskin, D. G.; StJohn, D. H. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:684067 |
61 |
Selection of densification strain to predict dynamic crushing stress at high impact velocity of ALPORAS aluminium foam |
Yahaya, M. A.; Ruan, R.; Lu, G.; Dargusch, M. S.; Yu, T. X. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:340727 |
1 |
Selective laser melting Fe and Fe-35Mn for biodegradable implants |
Carluccio, Danilo; Bermingham, Michael; Dargusch, M. S.; Demir, Ali Gökhan; Caprio, Leonardo; Previtali, Barbara |
Article |
University of Queensland [UQ eSpace] |
|
2 |
Sensitivity of Ti-6Al-4V components to oxidation during out of chamber Wire + Arc Additive Manufacturing |
Bermingham, M. J.; Thomson-Larkins, J.; St John, D. H.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
|
256 |
Simulation of convective flow and thermal conditions during ultrasonic treatment of an Al-2Cu alloy |
Wang, Gui; Croaker, Paul; Dargusch, Matthew; McGuckin, Damian; StJohn, David |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:558026 |
79 |
Sintering and biocompatibility of blended elemental Ti-xNb alloys |
Chen, Yunhui; Han, Pingping; Dehghan-Manshadi, Ali; Kent, Damon; Ehtemam-Haghighi, Shima; Jowers, Casey; Bermingham, Michael; Li, Tong; Cooper-White, Justin; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Site preference of Re in NiAl and valence band structure of NiAl containing Re: First-principles study and photoelectron spectrum |
Wei, H.; Liang, J. J.; Sun, B. Z.; Zheng, Q.; Sun, X. F.; Peng, P.; Yao, X.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:180638 |
57 |
Smart manufacturing and DVSM based on an ontological approach |
Huang, Zhuoyu; Jowers, Casey; Dargusch, Matthew S.; Dehghan-Manshadi, Ali |
Article |
University of Queensland [UQ eSpace] |
|
2 |
Strengthening of cast Ti-25Nb-3Mo-3Zr-2Sn alloy through precipitation of α in two discrete crystallographic orientations |
Paladugu, Mohanchand; Kent, Damon; Wang, Gui; Yu, Zhentao; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:218966 |
4 |
Surface and morphological modification of selectively laser melted titanium lattices using a chemical post treatment |
Soro, Nicolas; Saintier, Nicolas; Attar, Hooyar; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Switched photocurrent on tin sulfide-based nanoplate photoelectrodes |
Chen, Hongjun; Lyu, Miaoqiang; Zhang, Meng; Feron, Krishna; Searles, Debra J.; Dargusch, Matthew; Yao, Xiangdong; Wang, Lianzhou |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:453382 |
107 |
The aging response of a metastable β Ti alloy, BTi-6554 |
Wang, Yongqiang; Wang, Gui; Wang, Weiqi; Kent, Damon; Dargusch, Matthew S. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:252588 |
20 |
The cold-rolling behaviour of AZ31 tubes for fabrication of biodegradable stents |
Zhang, Yaowu; Kent, Damon; Wang, Gui; StJohn, David; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:341290 |
123 |
The dynamic response of a β titanium alloy to high strain rates and elevated temperatures |
Zhan, Hongyi; Kent, Damon; Wang, Gui; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:330382 |
264 |
The effect of temperature on the microstructure of a metastable beta titanium alloy |
Wang, Gui; Wang, Weiqi; Yang, Yulan; Kent, Damon; Dargusch, Matthew S. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:227049 |
9 |
The effect of ultrasonic treatment on the mechanisms of grain formation of as-cast high purity zinc |
Nagasivamuni, B.; Wang, Gui; StJohn, David H.; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
65 |
The Influence of Alloying and Fabrication Techniques on the Mechanical Properties, Biodegradability and Biocompatibility of Zinc: A Comprehensive Review |
Venezuela, J.; Dargusch, M.S. |
Article |
University of Queensland [UQ eSpace] |
|
364 |
The influence of laser processing parameters on the densification and surface morphology of pure Fe and Fe-35Mn scaffolds produced by selective laser melting |
Carluccio, D.; Demir, A. G.; Caprio, L.; Previtali, B.; Bermingham, M. J.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:4036076 |
8 |
The influence of microstructure on the hydrogen embrittlement susceptibility of martensitic advanced high strength steels |
Venezuela, Jeffrey; Zhou, Qingjun; Liu, Qinglong; Li, Huixing; Zhang, Mingxing; Dargusch, Matthew S.; Atrens, Andrej |
Article |
University of Queensland [UQ eSpace] |
|
55 |
The prospects for biodegradable zinc in wound closure applications |
Venezuela, Jeffrey Jones D.; Johnston, Sean; Dargusch, Matthew Simon |
Article |
University of Queensland [UQ eSpace] |
|
72 |
The prospects for biodegradable zinc in wound closure applications |
Venezuela, Jeffrey Jones D.; Johnston, Sean; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
10 |
The role of ultrasonic treatment in refining the as-cast grain structure during the solidification of an Al–2Cu alloy |
Wang, Gui; Dargusch, M. S.; Qian, M.; Eskin, D. G.; St John, David H. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:349327 |
194 |
Thermally enhanced machining of hard-to-machine materials-A review |
Sun, S.; Brandt, M.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:210028 |
3 |
Titanium sponge as a source of native nuclei in titanium alloys |
Tedman-Jones, S.N.; Bermingham, M.J.; McDonald, S.D.; StJohn, D.H.; Dargusch, M.S. |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Tool failure criteria while drilling titanium alloys |
Palanisamy, Suresh; Cong, Luo; Verijenko, Viktor; McDonald, Stuart D.; Owen, Robert; Dargusch, Matthew S. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:237418 |
2 |
Tool life and wear mechanisms in laser assisted milling Ti-6Al-4V |
Bermingham, M. J.; Sim, W. M.; Kent, D.; Gardiner, S.; Dargusch, M. S. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:346774 |
206 |
Tool life study of coated/uncoated carbide inserts during turning of Ti6Al4V |
Palanisamy, S.; Rahman Rashid, R. A.; Brandt, M.; Dargusch, M. S. |
Conference Papers/Posters |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:335601 |
2 |
Ultrahigh aspect ratio TiB nanowhisker-reinforced titanium matrix composites as lightweight and low-cost replacements for superalloys |
Otte, Joseph A.; Zou, Jin; Huang, Yang; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
11 |
Ultrasonic treatment for the refinement of brittle CaZn13 phases in a biomedical Zn-Cu-Ca alloy |
Balasubramani, Nagasivamuni; Yang, Nan; Venezuela, Jeffrey; Dargusch, Matthew |
Article |
University of Queensland [UQ eSpace] |
|
1 |
Understanding the corrosion behaviour of the magnesium alloys EV31A, WE43B, and ZE41A |
Soltan, Akif; Dargusch, Matthew S.; Shi, Zhiming; Gerrard, Darren; Atrens, Andrej |
Article |
University of Queensland [UQ eSpace] |
|
12 |
Valence band structure of the NiAl-Mo alloy from the photoelectron spectrum |
Wei, H.; Liang, J. J.; Peng, P.; Zheng, Q.; Sun, X. F.; Sun, B. Z.; Dargusch, M. S.; Yao, X. |
Article |
University of Queensland [UQ eSpace] |
https://espace.library.uq.edu.au/view/UQ:204627 |
1 |
Viewpoint - understanding Mg corrosion in the body for biodegradable medical implants |
Atrens, Andrej; Johnston, Sean; Shi, Zhiming; Dargusch, Matthew S. |
Article |
University of Queensland [UQ eSpace] |
|
10 |